How to remove stains from the fabric?(Life tips)

How to remove stains from the fabric?(Life tips)
Soy sauce stains: After soaking in cold water, rub soap on the stained area and rub it repeatedly to remove it. Melon and fruit stains: Fresh fruits and fruit stains can be immersed in salt water and rubbed immediately. If there are any traces, they should be washed with 20 times the ammonia water, and finally washed with detergent.
Vegetable soup and milk stains: Soak the freshly stained stains in cold water immediately (about 5-10 minutes). Rub some soap on the stained area and rub it lightly to remove it. Older stains can be removed with a small brush dipped in gasoline Remove the grease, and then soak the stain in a 20% ammonia solution and rub it gently. After the stain is removed, wash it with a detergent, and then rinse it with water… Continue reading

September 29, 2021 Fabrics

Is non-woven fabric fireproof?

Is non-woven fabric easy to catch fire?

Non-woven fabrics have the characteristics of damp-like, air-permeable, flexible, non-combustible, easy to decompose, rich in color, low in price, and reusable.
Flame-retardant non-woven fabric: It has the characteristics of high strength, good elasticity, good heat resistance, smooth surface and corrosion resistance… Continue reading

September 29, 2021 Fabrics

What is the meltblown cloth made of?

Melt blown cloth is mainly made of polypropylene, and the fiber diameter can reach 1 to 5 microns.
There are many voids, fluffy structure, and good anti-wrinkle ability. These ultra-fine fibers with unique capillary structure increase the number and surface area of fibers per unit area, so that the meltblown cloth has good filterability, shielding, heat insulation and oil absorption. .
It can be used in air, liquid filter materials, isolation materials, absorbing materials, medical protective materials, thermal insulation materials, oil absorbing materials, wipes, environmental protection, industrial materials and other fields… Continue reading

September 29, 2021 Fabrics

What is the cause of fly flocculation during the production of melt blown cloth?

The main causes of flocculation in melt blown cloth are:
Because the raw material and the corresponding spinning temperature are not well matched during the production process, the temperature is relatively high.
Need to be resolved according to the situation.
If the fly floc area is relatively large, we can adjust the temperature of the screw spinning and the temperature of the hot air.
If the fly floc area is not large and the fly floc is regional, we can adjust the die temperature of the corresponding location.
In this way, the problem of flocculation of melt blown cloth can be solved well, and the effect of making masks or other fabrics will be better… Continue reading

September 29, 2021 Blog, Fabrics

How to produce and process melt blown cloth fabrics?

How to produce and process melt blown cloth fabrics?Best melt-blown cloth processing factory,Which melt-blown fabric is the best,Which non-woven fabric is suitable for making masks,Melt-blown fabric die head assembly,Melt-blown fabric Quality… Continue reading

September 28, 2021 Product Information, Questions&Answers

What kind of mask is best for you?

The best corona supplies supplier factory,How to choose corona mask,The cheapest high-quality corona surgical mask,Medical surgical masks… Continue reading

September 28, 2021 Questions&Answers

How to use household oxygen generator for health care

How to use household oxygen generator for health care,oxygen cylinder,10L Medical grade oxygen generator,how to choose good oxygen generator,The best corona supplies supplier,Oxygen concentrator is better than oxygen cylinder,dual flow oxygen generator… Continue reading

September 28, 2021 Questions&Answers

How to choose PSA oxygen generator?

How to choose PSA oxygen generator?
Evaluate the quality of the oxygen concentrator: one
The parameter index of molecular sieve of oxygen generator:
5A oxygen-rich molecular sieve (PSA oxygen generator)… Continue reading

September 27, 2021 Blog, Product Information

Corona protection masks (show of beautiful models)

Model showing corona mask (Welcome to reprint, please indicate the source and copyright, thank you, bless.)… Continue reading

September 21, 2021 Blog, Fabrics, Product Information

Blue three-layer color protective activated carbon mask

Blue three-layer color protective activated carbon mask… Continue reading

July 7, 2021 Product Information

The core component of the automatic melt blown cloth production line: die head(single spray, double spray)

1. Meltblown process
Polymer preparation → melt extrusion → metering pump → melt blown die assembly (key device module) → spray out → cooling → receiving device to form a net
2. Meltblown equipment
Main equipment: feeder, screw extruder, metering pump, melt blown die assembly, air compressor, air heater, receiving device, winding device.
Production auxiliary equipment: die cleaning furnace, electrostatic application device, etc… Continue reading

May 11, 2021 Blog, Company News, Video

N95 self-priming-filter-anti-particle-respirator

KN95 masks are Chinese standard masks, which are a type of masks with a particulate filtering effect in China. N95 masks are certified by the National Institute of Occupational Safety Guards in the United States and are one of the nine types of particulate protective masks. KN95 respirator and N95 respirator are the same in terms of particle filtering effect, and there is no difference. Self-Priming Filter Anti-Particle Respirator… Continue reading

June 16, 2020 Interesting things, Product Information
Need Help? Chat with us